The production process of wood logs into a furniture is a long process and requires high precision so that it can produce good quality. As admin that from yesterday discuss the Indonesia furniture handicraft wholesale marketplace wants to describe in broad outline how all these processes running and how to arrange for some of the important process are not exceeded.

The entire process is considered important differ and require different examinations. From the beginning of a log of wood, sawing, timber drying, materials, manufacture of construction, assembly and finishing needs priorities and different tools.

1.) Logs

Circular timber with a diameter varying from 25-80 cm (depending on type of wood) is the result of felling of trees in the forest and not through any process except at the tip of the crack preventative action log. In some kinds of wood made with the aim of stripping the bark of the acceleration of timber drying. Then the logs of wood are sawed to get the size of boards and beams as required.

2.) Sawmill

In order to be processed with more wood dryers, splitting logs made such that the dimensions of wood match the size of the wood drying room and the size of furniture that will be created.

3.) Wood drying

Wood must be dried because of its physical properties that can change the shape of line with the changing levels of water content inside the timber.

4.) Basic Materials Processing

The most ideal wood split and truncated when it is dry and this process is carried out in materials processing’s room. In this process we must know the exact measurements for furniture components on time so that arrangements concerning the yield and wood fiber in accordance with the position of the components will be set correctly. Processed wood materials only to the size of coarse but it was done mainly quality selection of wooden eye, wooden pig and other defects of natural wood. Material quality checks in conjunction with natural defects of wood should be done at this point.

5.) Construction

Starting with wood shavings to produce a smooth surface, then cut on the side so long as the size of the hole until the making of construction is the longest process in the production of wooden furniture. Some components or parts of furniture often had to go through the process on the same machine repeatedly. Construction process includes:
The making dowel holes – Making tenon & Mortise – Grooves and indentation – Pingul on the sides of the timber – and other.

6.) Sanding

The first time you have to do when the work piece is completed through the construction process. And this process requires several times with different sandpaper grits gradually. Within this stage it should be no more broken wood defects, cracks or color because it is supposed to be carried out during the construction process.

7.) Assembly

Depending on your product type, if the product is a Knock Down product or Exhalation, then the assembly can be done after finishing. However, for components such as doors and drawers need to be assembled first. When all the components that require pre-assembly has been set properly, then sanding can be resumed after finishing.

8.) Finishing

All defective timber and construction errors should have been resolved when they entered this phase. Finishing is the final step in the process of making furniture. As a step towards completion when all components have been properly connected.

9.) Installation of equipment

Equipment such as hinges, locks and door handles should be installed after the finishing process is completed so awake quality material. For that also supplies furniture should be removed or covered with plastic when you do the finishing. In addition to this will be good for the equipment, also maintain equipment durability of rust or scratches sandpaper.

Ok, that’s all I can inform, see ya at the next post about Indonesia Furniture Handicraft Wholesale Marketplace.

Recommend Stuff:

50 Ways to Paint Furniture: The Easy, Step-by-Step Way to Decorator Looks50 easy decorative furniture-painting projects.

Most decorative painting books on the market are oriented toward the crafter rather than the home ... Read More >

Designer's Guide to Furniture Styles (2nd Edition)This book profiles the history of the development of various furniture styles, exploring the evolution of style in the context of the architectural se... Read More >

History of Furniture: A Global ViewGlobalization is the wave of the future, but it is also affecting the study of history
and design history is no exception. Programs in the visual ... Read More >

Field Guide to American Antique Furniture: A Unique Visual System for Identifying the Style of Virtually Any Piece of American Antique FurnitureWith more than seventeen hundred superb drawings, this authoritative book offers a unique visual system for identifying the style of virtually any piece of American antique furniture.

Encyclopedia of Furniture MakingErnest Joyce, Revised & Expanded by Alan Peters, Technical Consultant, Patrick Spielman It’s been the number-one book on the subject for most of the... Read More >